How to Choose an Air Conditioning Installer: 7 Things to Check Before You Book

Choosing an air conditioning installer is often more important than choosing the air conditioning unit itself.

A system may have excellent specifications on paper, but it will only perform properly if it is selected, positioned, installed and commissioned correctly. The difference between a well-planned installation and a rushed one often becomes obvious months later: a room that never quite cools evenly, an outdoor unit that is noisy or restricted, condensation around the indoor unit, or a quotation that did not include the work needed to finish the job.

Price is an obvious place to start when comparing installers, but it should not be the only measure. Two quotations can be close in cost while including very different levels of survey, equipment, pipework, electrical work, access arrangements and aftercare. A lower price may simply mean that some of the necessary work has been left out.

Before you accept a quotation, ask the installer to explain how they have assessed your property and what their price includes. The seven checks below will help you compare proposals properly, identify gaps before work begins and choose an installation that suits your home or business.

1. A Site Survey and Cooling Assessment

A competent installer should not recommend equipment based on room size alone. Understanding how air conditioning works can also help you ask better questions about cooling capacity, airflow and the position of the indoor and outdoor units. A proper survey considers how the space is used, how much heat enters it, and where the indoor and outdoor units can realistically be installed.

The assessment should cover:

  • Room dimensions, ceiling height and layout
  • Windows, glazing, orientation and direct sunlight
  • The number of people who normally use the space
  • Heat from computers, televisions, lighting, kitchen equipment or machinery
  • Insulation, building construction and heat loss
  • How the room is used at different times of day
  • Existing electrical capacity and any planned electrical work
  • Access for installation and future servicing

A bedroom, home office, restaurant and server room have very different requirements. A small office with several computers, large south-facing windows and afternoon sun may need more cooling capacity than a similarly sized storeroom. A bedroom may need quieter operation and careful airflow positioning, while a server room needs reliable cooling and a system designed around continuous operation.

The survey should also establish where the indoor and outdoor units can go, how refrigerant pipework will be routed and whether there are access, structural or building-management restrictions. Airconco’s surveyors assess heat load and property requirements before recommending suitable equipment and preparing a written installation quotation.

For more detail on the process, see our air conditioning installation in London.

2. Indoor Unit Position and Airflow

The position of the indoor unit has a direct effect on comfort. A system can be correctly sized, yet still feel uncomfortable if it blows cold air directly over a bed, desk or seating area.

Before agreeing to an installation, ask the installer:

  • Where the indoor unit will be fitted, and why
  • How air will circulate around the room
  • Whether it will blow directly towards beds, desks or seating
  • Whether walls, cupboards, doors or other obstructions will restrict airflow
  • How filters and components will be accessed for cleaning and servicing
  • Whether the proposed position meets the manufacturer’s clearance requirements

In a bedroom, it is sensible to avoid positioning the unit directly above the bed. In an office, poor placement can leave one person in a constant draught while another part of the room remains too warm. The aim is not simply to fit the unit on the nearest available wall; it is to create comfortable, even airflow throughout the space.

The right type of indoor unit also depends on the property. Wall-mounted systems are commonly used in individual rooms, while ceiling cassette units and ducted systems may suit larger rooms, open-plan areas or commercial premises. Airconco provides dedicated guidance on bedroom AC installations and office air conditioning.

Indoor unit installation - 7 checklist how to choose AC installers

3. Outdoor Unit Location, Airflow and Noise

The outdoor unit releases the heat removed from inside the property. It needs sufficient airflow, secure support, and safe access for maintenance.

Ask the installer exactly where the outdoor unit will be positioned, then check:

  • Whether there is enough clearance around the unit for air to circulate
  • Whether engineers can reach it safely for servicing and repairs
  • Whether it is likely to create noise issues for you or neighbours
  • Whether the wall, roof, balcony or ground can support its weight
  • How the pipework will run between the indoor and outdoor units
  • Whether the installation complies with the manufacturer’s installation requirements

An outdoor unit placed in a confined space may struggle to discharge heat effectively. That can reduce performance and make the system work harder than it needs to. The location should therefore be agreed before installation begins, not decided on the day.

This deserves particular attention in London flats, apartments and commercial buildings, where external wall space, roof access, listed-building constraints and managing-agent requirements can limit the options. Loft conversions can present similar challenges, particularly where roof space, access and pipework routes are limited; see our guidance on air conditioning for loft conversions. Where a conventional outdoor unit is impractical, discuss alternatives such as water-cooled systems or a no-outside box air conditioning solution.

4. Secure Mounting and a Properly Finished Installation

Both indoor and outdoor units need to be securely supported using fixings and supports suitable for their weight, location and the building structure.

Check that the quotation and proposed installation include:

  • Suitable brackets or ground supports for the outdoor unit
  • Secure fixings for the indoor unit
  • Correctly supported and protected refrigerant pipework and cabling
  • Sealed and neatly finished wall penetrations
  • Tidy trunking where pipework or cables are visible
  • Safe access arrangements for installation and future maintenance

Improvised supports, loose cables or poorly finished openings can cause vibration, noise and avoidable damage. If the outdoor unit will be fitted at height, ask how safe access will be managed both during installation and for future servicing.

A well-finished installation should look considered, not temporary. Ask to see examples of completed work, particularly for properties similar to yours, and ask whether the installer will make good any drilling or access damage.

5. Refrigerant Pipework and Insulation

The refrigerant pipework connects the indoor and outdoor units and is central to how the system performs. It must be correctly sized, routed and insulated in line with the manufacturer’s requirements.

Poorly routed or inadequately insulated pipework can cause condensation, reduce efficiency and make future maintenance more difficult. The installation should account for:

  • Correct pipe dimensions and maximum pipe-run lengths
  • Suitable insulation to reduce heat transfer and prevent condensation
  • Protection for exposed pipework where required
  • Correct refrigerant connections and installation procedures
  • Properly sealed wall penetrations
  • A pressure test and vacuum procedure before refrigerant is introduced, where applicable

In the UK, individuals working with F-gas refrigerants must hold the appropriate qualification, and companies servicing stationary equipment containing F-gases for others must hold company certification. The government’s guidance sets out the qualifications required to install, maintain, leak-check, and recover refrigerant from stationary refrigeration, air-conditioning, and heat-pump systems.

When comparing installers, ask who will carry out the refrigerant work, whether they hold the relevant qualification and whether the company holds the required certification.

Outdoor unit installation - 7 checklist how to choose AC installers

6. Condensate Drainage

When an air conditioning system cools a room, it removes moisture from the air. That moisture collects as condensate inside the indoor unit and must be drained away safely.

Ask the installer:

  • Whether gravity drainage is possible
  • Whether the drainage pipe can achieve the required fall
  • Where the water will discharge
  • How the pipe will be supported and protected
  • Whether a condensate pump is needed, and why
  • How the drainage arrangement will be tested before handover

Drainage is easy to overlook, but a poorly designed arrangement can result in water leaking from the indoor unit and damaging ceilings, walls, flooring or furnishings. If you notice water around an indoor unit after installation, read our guide to whether an air conditioner can leak and what may be causing it

Before handover, the installer should check that condensate drains correctly. If a pump is required, ask why it is necessary, where it will be located and what maintenance it needs.

7. Testing, Commissioning and Handover

An installation is not complete simply because the equipment switches on. Test and commission the system in line with the manufacturer’s requirements.

Depending on the installation, this may include:

  • Refrigerant connection and leak checks
  • Electrical safety and connection checks
  • Condensate drainage checks
  • Confirmation of cooling and heating operation
  • Airflow and unit-performance checks
  • Testing of controls and remote handsets
  • An explanation of how to use the system
  • Handover documentation and maintenance guidance

The AC installer should also explain ongoing maintenance requirements and make clear who to contact if a fault develops. For commercial projects, ask whether commissioning records or other project documentation will be provided. This is particularly useful for offices, restaurants, healthcare settings and server rooms, where documented installation and maintenance can matter.

Before signing off the work, make sure you know how to operate the system, what maintenance it needs and who to contact if something goes wrong.

Pipework and insulation

How to Compare Air Conditioning Quotations

Once you have quotations, do not compare the final price alone. Two installers may quote similar amounts while proposing very different equipment, workmanship, and levels of service.

What to check What the quotation should make clear
Equipment Manufacturer, model and cooling capacity
System selection Why the proposed system suits the property
Installation Indoor and outdoor units, pipework, insulation and drainage
Electrical work Required connections and any additional electrical work
Access and building work Brackets, access equipment, drilling and making good
Commissioning Testing, handover and documentation
Warranty Parts and labour cover, exclusions and servicing requirements
Extras Removal of old equipment, waste disposal and any potential additional charges

If a quotation is vague, ask for the missing detail before accepting it. A clear quotation should tell you what you are paying for, rather than leaving you to discover it on installation day.

Questions to Ask Before Booking

These questions are useful whether you are installing air conditioning in a flat, house, office or commercial premises:

  • Will a surveyor visit the property before providing a quotation?
  • How has the cooling load been calculated?
  • Which manufacturer and model are being proposed, and why?
  • Where will the indoor and outdoor units be positioned?
  • How will the refrigerant pipework be routed?
  • Is condensate drainage included, and will a pump be required?
  • Who will carry out the electrical work?
  • Are access equipment, drilling and making good included?
  • What testing and commissioning will be carried out?
  • What warranty is included, and what servicing conditions apply?
  • Are there any potential additional charges?

A good installer should be able to answer these questions clearly. If they cannot, ask for the details in writing before proceeding.

Flats and Apartments: Check Permissions First

Installing air conditioning in a flat or apartment can involve additional requirements, particularly if an outdoor unit needs to be fitted to an external wall or positioned in a shared area.

Your lease, freeholder or managing agent may restrict external alterations. Depending on the property and the proposed installation, planning permission or other approvals may also be needed.

Check permissions before arranging a survey. Airconco asks for written confirmation from the managing agent, freeholder or relevant authority before carrying out a free survey for flats and apartments. If a survey is requested before permission has been obtained, the applicable £240 plus VAT survey charge is set out in Airconco’s terms and conditions; it is refundable against the installation cost if you proceed with Airconco.

Why Choose Airconco?

Airconco, trading as The Air Conditioning Company, has been installing air conditioning since 1986. We work with homeowners and businesses across Greater London and the Home Counties, from single bedrooms and home offices to larger commercial premises.

We install equipment from established manufacturers including Daikin, Mitsubishi Electric and Fujitsu, and are a Daikin D1+ Premium Partner. Customers can also visit our London showroom to see selected systems in operation and discuss their requirements with our team.

Qualifying installations are covered by Airconco’s 10-year warranty:

  • Years 1–3: parts and labour
  • Years 4–10: parts

Server room installations have a separate five-year warranty. All warranty cover is subject to the applicable terms and servicing requirements.

Arrange an Air Conditioning Site Survey

If you are planning an air conditioning installation, the best first step is a proper site survey. It allows an installer to assess the space, discuss how you use it, and recommend equipment and pipework routes that will work in practice, not just on a quotation sheet.

If you need to improve comfort before an installation is arranged, our guide to quick and effective ways to cool down a room offers practical interim measures.

A survey also gives you the opportunity to ask about unit positions, noise, access, drainage, electrical requirements, and any restrictions affecting your property. That means you can make a decision based on a clear installation plan, rather than relying on a price alone.

Airconco offers a free site survey for qualifying enquiries. Request yours through our free site survey page. Explore our air conditioning installation solutions in London, or call 020 8346 6000.

Which of these seven checks matters most for your property, and has your current quotation explained how it will be handled?

Commercial installation showing finsih commercial AC work

Related Posts